Whether in the toilet or in a pool, it sometimes happens that the Meizu MX6 is slipped into the water. Even so, it is not simply because a cellphone has fallen into the water that it’s unavoidably dead. In fact, it is possible to redo an Meizu MX6 that has fallen into the water. To get this done, it is essential to respect specific steps. People typically have bad reflexes and this is what can damage the Meizu MX6. We will first of all discover the steps to be taken after the Meizu MX6 has fallen into the water. We will discover in the 2nd place the common errors that a good number of people make.
Steps to follow in the event that your Meizu MX6 fell into the water
If you want to restore your Meizu MX6 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Meizu MX6 back on after exiting the water
The first thing to perform when the Meizu MX6 has fallen into the water is to shut off the cellphone. In fact, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Meizu MX6 is started and wet, you can create a short circuit and therefore toast the cellphone.
Remove detachable components
When the Meizu MX6 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Meizu MX6
Utilizing a straw, you need to suck up the water that is contained in your Meizu MX6. For this, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Meizu MX6, you will be ready to start drying it.
Dry the Meizu MX6
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Avoid using procédures that cause the cellphone to heat up or damage the cellphone. When it is completed, we advise you to leave the Meizu MX6 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Meizu MX6.
Reassemble the components and turn on the Meizu MX6
When you have completed the previous steps, your Meizu MX6 should be dry. So now you can try to turn on the Meizu MX6. If perhaps this does not function, we advise you to hang on some days or to bring the Meizu MX6 to a repairshop.
What should not be done in the event that the Meizu MX6 has fallen into the water
There are several stuff not to perform when your Meizu MX6 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can kill the Meizu MX6. Following, it is strongly recommended not to use a heat source to dry the Meizu MX6. In fact, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could as well damage the Meizu MX6.
