Whether in the toilet or in a pool, it from time to time happens that the Meizu MX3 is dropped into the water. Nonetheless, it isn’t simply because a cellphone has fallen into the water that it is undoubtedly dead. Indeed, it is feasible to redo an Meizu MX3 that has fallen into the water. To accomplish this, it is essential to respect certain steps. People generally have bad reflexes and this is what can damage the Meizu MX3. We will first discover the steps to be taken after the Meizu MX3 has fallen into the water. We will discover in the 2nd place the common errors that many people make.
Steps to follow if perhaps your Meizu MX3 fell into the water
Whenever you need to recover your Meizu MX3 in operating order, we suggest that you follow the steps below.
Do not attempt to turn the Meizu MX3 back on after exiting the water
The first thing to perform when the Meizu MX3 has fallen into the water is to turn off the cellphone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Meizu MX3 is turned on and wet, you might generate a short circuit and therefore toast the cellphone.
Remove detachable components
When the Meizu MX3 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Meizu MX3
Employing a straw, you need to suck up the water that is contained in your Meizu MX3. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Meizu MX3, you will have the ability to start drying it.
Dry the Meizu MX3
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the cellphone to heat up or damage the cellphone. When it is done, we recommend you to leave the Meizu MX3 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Meizu MX3.
Reassemble the components and turn on the Meizu MX3
When you have completed the prior steps, your Meizu MX3 should be dry. So now you can try to turn on the Meizu MX3. If this does not perform, we recommend you to hold out a few days or to bring the Meizu MX3 to a repairman.
What should not be done if perhaps the Meizu MX3 has fallen into the water
You will find a number of points not to perform when ever your Meizu MX3 has fallen into the water. The first is to try to turn the cellphone back on just after. This can kill the Meizu MX3. Next, it is strongly recommended not to use a heat source to dry the Meizu MX3. Certainly, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could also damage the Meizu MX3.
