Whether in the wc or in a pool, it from time to time happens that the Meizu M3s is slipped into the water. Nonetheless, it is not because a phone has fallen into the water that it is undoubtedly dead. In fact, it is feasible to redo an Meizu M3s that has fallen into the water. To accomplish this, it is essential to respect particular steps. People typically have bad reflexes and this is what can degrade the Meizu M3s. We will first see the methods to be taken after the Meizu M3s has fallen into the water. We will see in the secondary place the classical mistakes that many people make.
Steps to follow if your Meizu M3s fell into the water
If you need to recover your Meizu M3s in working order, we suggest that you follow the steps below.
Do not attempt to turn the Meizu M3s back on after exiting the water
The first thing to do when the Meizu M3s has fallen into the water is to switch off the phone. In fact, if it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Meizu M3s is started and wet, you could generate a short circuit and as a result toast the phone.
Remove detachable components
Once the Meizu M3s is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and continue to the following step.
Aspire the water that is in your Meizu M3s
By using a straw, you will have to suck up the water that is contained in your Meizu M3s. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Meizu M3s, you will be ready to start drying it.
Dry the Meizu M3s
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using procédures that cause the phone to heat up or damage the phone. Once it is done, we suggest you to leave the Meizu M3s in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Meizu M3s.
Reassemble the components and turn on the Meizu M3s
When you have completed the previous steps, your Meizu M3s should be dry. So now you can try to turn on the Meizu M3s. If this does not function, we suggest you to hang on some days or to bring the Meizu M3s to a repairshop.
What should not be done if the Meizu M3s has fallen into the water
You will find several stuff not to do when ever your Meizu M3s has fallen into the water. The first is to try to turn the phone back on just after. This can destroy the Meizu M3s. Following, it is highly recommended not to use a heat source to dry the Meizu M3s. In fact, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Meizu M3s.
