Whether in the toilet or in a swimming pool, it occasionally happens that the Meizu M3E is slipped into the water. Nevertheless, it is not because a mobile phone has fallen into the water that it is obviously dead. In fact, it is possible to redo an Meizu M3E that has fallen into the water. To get this done, it is needed to respect specific steps. People often have bad reflexes and this is what can deteriorate the Meizu M3E. We will first see the techniques to be taken after the Meizu M3E has fallen into the water. We will see in the second place the common mistakes that the majority of people make.
Steps to follow if perhaps your Meizu M3E fell into the water
In the event that you need to restore your Meizu M3E in working order, we advise that you follow the steps below.
Do not try to turn the Meizu M3E back on after exiting the water
The first thing to perform when the Meizu M3E has fallen into the water is to shut off the mobile phone. In fact, if perhaps it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Meizu M3E is started and wet, you could produce a short circuit and consequently toast the mobile phone.
Remove detachable components
Once the Meizu M3E is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Meizu M3E
By using a straw, you need to suck up the water that is contained in your Meizu M3E. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Meizu M3E, you will be ready to start drying it.
Dry the Meizu M3E
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we recommend you to leave the Meizu M3E in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Meizu M3E.
Reassemble the components and turn on the Meizu M3E
When you have completed the previous steps, your Meizu M3E should be dry. So now you can make an attempt to turn on the Meizu M3E. If perhaps this doesn’t function, we recommend you to hang on some days or to bring the Meizu M3E to a repairman.
What should not be done if perhaps the Meizu M3E has fallen into the water
You will find several stuff not to perform when your Meizu M3E has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can demolish the Meizu M3E. Next, it is strongly suggested not to use a heat source to dry the Meizu M3E. Certainly, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Indeed, it could as well damage the Meizu M3E.
