Whether in the toilet or in a pool, it from time to time happens that the Meizu M2 is dropped in the water. On the other hand, it isn’t because a mobile has fallen in the water that it is undoubtedly dead. Indeed, it is possible to redo an Meizu M2 that has fallen in the water. To accomplish this, it is needed to respect particular steps. People often have bad reflexes and this is what can damage the Meizu M2. We will 1st discover the techniques to be taken after the Meizu M2 has fallen into the water. We will discover in the 2nd place the classical mistakes that many people make.
Methods to follow in the event that your Meizu M2 fell into the water
If perhaps you need to restore your Meizu M2 in working order, we highly recommend that you follow the steps below.
Do not attempt to turn the Meizu M2 back on after exiting the water
The very first thing to perform when the Meizu M2 has fallen into the water is to turn off the mobile. Indeed, in the event that it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Meizu M2 is turned on and wet, you might create a short circuit and consequently toast the mobile.
Remove detachable components
When the Meizu M2 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your Meizu M2
Utilizing a straw, you have got to suck up the water that is contained in your Meizu M2. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Meizu M2, you will have the capacity to start drying it.
Dry the Meizu M2
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. When it is performed, we suggest you to leave the Meizu M2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Meizu M2.
Reassemble the components and turn on the Meizu M2
When you have completed the prior steps, your Meizu M2 should be dry. So now you can make an attempt to turn on the Meizu M2. In the event that this doesn’t work, we suggest you to hang on a few days or to bring the Meizu M2 to a repairman.
What should not be done in the event that the Meizu M2 has fallen into the water
You will find several things not to perform when your Meizu M2 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can demolish the Meizu M2. Next, it is strongly advised not to use a heat source to dry the Meizu M2. Without a doubt, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also ruin the Meizu M2.
