How to fix a water damaged on Medion Life P4502

Whether in the toilet or in a swimming pool, it sometimes happens that the Medion Life P4502 is dropped into the water. Nonetheless, it isn’t simply because a mobile has fallen into the water that it is obviously dead. In fact, it is feasible to redo an Medion Life P4502 that has fallen into the water. To achieve this, it is necessary to respect certain steps. People frequently have bad reflexes and this is what can degrade the Medion Life P4502. We will first of all discover the steps to be taken after the Medion Life P4502 has fallen into the water. We will discover in the secondary place the common errors that a good number of people make.water-damaged-Medion-Life-P4502

Methods to follow if perhaps your Medion Life P4502 fell into the water

If perhaps you desire to restore your Medion Life P4502 in operating order, we recommend that you follow the steps listed below.

Don’t try to turn the Medion Life P4502 back on after exiting the water

One thing to perform when the Medion Life P4502 has fallen into the water is to shut off the mobile. In fact, if perhaps it didn’t switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Medion Life P4502 is started and wet, you may generate a short circuit and consequently toast the mobile.

Remove detachable components

When the Medion Life P4502 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Medion Life P4502

Utilizing a straw, you will have to suck up the water that is contained in your Medion Life P4502. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Medion Life P4502, you will have the ability to start drying it.

Dry the Medion Life P4502

The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the mobile to heat up or damage the mobile. When it is completed, we recommend you to leave the Medion Life P4502 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Medion Life P4502.

Reassemble the components and turn on the Medion Life P4502

When you have completed the previous steps, your Medion Life P4502 should be dry. So now you can make an attempt to turn on the Medion Life P4502. If perhaps this does not do the job, we recommend you to hold out a few days or to bring the Medion Life P4502 to a repairman.

What should not be done if perhaps the Medion Life P4502 has fallen into the water

You will find a number of stuff not to perform when ever your Medion Life P4502 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can destroy the Medion Life P4502. Next, it is strongly recommended not to use a heat source to dry the Medion Life P4502. Certainly, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the Medion Life P4502.