Whether in the wc or in a pool, it from time to time occurs that the M HORSE Pure 2 is dropped in the water. Nonetheless, it is not because a telephone has fallen in the water that it’s undoubtedly dead. In fact, it is possible to redo an M HORSE Pure 2 that has fallen in the water. To do this, it is necessary to respect particular actions. People often have bad reflexes and this is what can deteriorate the M HORSE Pure 2. We will first discover the techniques to be taken after the M HORSE Pure 2 has fallen into the water. We will discover in the secondary place the common mistakes that a good number of people make.
Steps to follow if your M HORSE Pure 2 fell into the water
If you want to restore your M HORSE Pure 2 in working order, we recommend that you follow the steps below.
Don’t try to turn the M HORSE Pure 2 back on after getting out the water
The first thing to accomplish when the M HORSE Pure 2 has fallen into the water is to turn off the telephone. In fact, if it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the M HORSE Pure 2 is started and wet, you may make a short circuit and as a result toast the telephone.
Remove detachable components
When the M HORSE Pure 2 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your M HORSE Pure 2
Utilizing a straw, you will have to suck up the water that is contained in your M HORSE Pure 2. For this, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your M HORSE Pure 2, you will be able to start drying it.
Dry the M HORSE Pure 2
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the M HORSE Pure 2 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the M HORSE Pure 2.
Reassemble the components and turn on the M HORSE Pure 2
When you have completed the prior steps, your M HORSE Pure 2 should be dry. So now you can try to turn on the M HORSE Pure 2. If perhaps this does not perform, we advise you to wait a couple of days or to bring the M HORSE Pure 2 to a repairman.
What should not be done if the M HORSE Pure 2 has fallen into the water
You will find a number of stuff not to accomplish when ever your M HORSE Pure 2 has fallen into the water. The first is to try to turn the telephone back on just after. This can demolish the M HORSE Pure 2. Next, it is strongly suggested not to use a heat source to dry the M HORSE Pure 2. Indeed, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the telephone, do not shake it. In fact, it could as well damage the M HORSE Pure 2.
