Whether in the toilet or in a swimming pool, it occasionally happens that the LG Xcam is dropped in the water. However, it is not because a phone has fallen in the water that it’s undoubtedly dead. In truth, it is possible to redo an LG Xcam that has fallen in the water. To achieve this, it is required to respect particular steps. People generally have bad reflexes and this is what can deteriorate the LG Xcam. We will first see the techniques to be taken after the LG Xcam has fallen into the water. We will see in the second place the classical errors that many people make.
Steps to follow in cases where your LG Xcam fell into the water
In the event that you want to restore your LG Xcam in operating order, we highly recommend that you follow the steps listed below.
Do not try to turn the LG Xcam back on after getting out the water
The first thing to do when the LG Xcam has fallen into the water is to turn off the phone. In truth, in cases where it didn’t turn off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the LG Xcam is switched on and wet, you can produce a short circuit and therefore toast the phone.
Remove detachable components
Once the LG Xcam is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once finished, put all of these items to dry and proceed to the next step.
Aspire the water that is in your LG Xcam
Using a straw, you must suck up the water that is contained in your LG Xcam. For this, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your LG Xcam, you will have the capacity to start drying it.
Dry the LG Xcam
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. Once it is completed, we recommend you to leave the LG Xcam in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the LG Xcam.
Reassemble the components and turn on the LG Xcam
When you have completed the prior steps, your LG Xcam should be dry. So now you can try to turn on the LG Xcam. In the event that this doesn’t perform, we recommend you to wait a few days or to bring the LG Xcam to a repairman.
What should not be done in cases where the LG Xcam has fallen into the water
You will find several points not to do when your LG Xcam has fallen into the water. The first is to try to turn the phone back on just after. This can destroy the LG Xcam. Following, it is strongly suggested not to use a heat source to dry the LG Xcam. Indeed, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. In fact, it could also damage the LG Xcam.
