How to fix a water damaged on LG L1

Whether in the toilet or in a pool, it from time to time occurs that the LG L1 is slipped in the water. Nevertheless, it isn’t simply because a phone has fallen in the water that it’s unavoidably dead. In truth, it is feasible to redo an LG L1 that has fallen in the water. To accomplish this, it is needed to respect specific actions. People generally have bad reflexes and this is what can damage the LG L1. We will 1st see the techniques to be taken after the LG L1 has fallen into the water. We will see in the second place the classical mistakes that a large number of people make.water-damaged-LG-L1-II

Methods to follow if perhaps your LG L1 fell into the water

Whenever you need to restore your LG L1 in working order, we highly recommend that you follow the steps below.

Do not attempt to turn the LG L1 back on after getting out the water

The first thing to do when the LG L1 has fallen into the water is to switch off the phone. In truth, if perhaps it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the LG L1 is turned on and wet, you may create a short circuit and consequently toast the phone.

Remove detachable components

When the LG L1 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these items to dry and continue to the next step.

Aspire the water that is in your LG L1

Utilizing a straw, you will have to suck up the water that is contained in your LG L1. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your LG L1, you will be ready to start drying it.

Dry the LG L1

The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the phone to heat up or damage the phone. When it is finished, we recommend you to leave the LG L1 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the LG L1.

Reassemble the components and turn on the LG L1

When you have completed the prior steps, your LG L1 should be dry. So now you can try to turn on the LG L1. In the event that this does not perform, we recommend you to hold out a couple of days or to bring the LG L1 to a repairshop.

What should not be done if perhaps the LG L1 has fallen into the water

There are a number of stuff not to do when your LG L1 has fallen into the water. The 1st is to try to turn the phone back on just after. This can kill the LG L1. Following, it is strongly advised not to use a heat source to dry the LG L1. Without a doubt, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Certainly, it could additionally damage the LG L1.