How to fix a water damaged on Lenovo VIBE Z2 Pro

Whether in the toilet or in a swimming pool, it from time to time occurs that the Lenovo VIBE Z2 Pro is dropped into the water. Nevertheless, it’s not because a mobile phone has fallen into the water that it is undoubtedly dead. Indeed, it is possible to redo an Lenovo VIBE Z2 Pro that has fallen into the water. To get this done, it is necessary to respect specific actions. People often have bad reflexes and this is what can damage the Lenovo VIBE Z2 Pro. We will 1st discover the methods to be taken after the Lenovo VIBE Z2 Pro has fallen into the water. We will discover in the 2nd place the common errors that a large number of people make.water-damaged-Lenovo-VIBE-Z2-Pro

Methods to follow if perhaps your Lenovo VIBE Z2 Pro fell into the water

If you need to restore your Lenovo VIBE Z2 Pro in operating order, we highly recommend that you follow the steps listed below.

Do not try to turn the Lenovo VIBE Z2 Pro back on after exiting the water

One thing to perform when the Lenovo VIBE Z2 Pro has fallen into the water is to switch off the mobile phone. Indeed, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Lenovo VIBE Z2 Pro is turned on and wet, you may make a short circuit and consequently toast the mobile phone.

Remove detachable components

Once the Lenovo VIBE Z2 Pro is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will probably be necessary to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and continue to the next step.

Aspire the water that is in your Lenovo VIBE Z2 Pro

Utilizing a straw, you must suck up the water that is contained in your Lenovo VIBE Z2 Pro. For this, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Lenovo VIBE Z2 Pro, you will have the ability to start drying it.

Dry the Lenovo VIBE Z2 Pro

The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we recommend you to leave the Lenovo VIBE Z2 Pro in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Lenovo VIBE Z2 Pro.

Reassemble the components and turn on the Lenovo VIBE Z2 Pro

When you have completed the previous steps, your Lenovo VIBE Z2 Pro should be dry. So now you can make an attempt to turn on the Lenovo VIBE Z2 Pro. In the event that this does not function, we recommend you to hold out a few days or to bring the Lenovo VIBE Z2 Pro to a repairman.

What should not be done if perhaps the Lenovo VIBE Z2 Pro has fallen into the water

There are several points not to perform when your Lenovo VIBE Z2 Pro has fallen into the water. The 1st is to make an attempt to turn the mobile phone back on just after. This can kill the Lenovo VIBE Z2 Pro. Next, it is highly suggested not to use a heat source to dry the Lenovo VIBE Z2 Pro. Certainly, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could additionally ruin the Lenovo VIBE Z2 Pro.