Whether in the wc or in a pool, it sometimes occurs that the Lenovo Ideaphone A6000 is slipped in the water. Even so, it is not because a mobile has fallen in the water that it is unavoidably dead. In truth, it is possible to redo an Lenovo Ideaphone A6000 that has fallen in the water. To achieve this, it is necessary to respect particular steps. People frequently have bad reflexes and this is what can degrade the Lenovo Ideaphone A6000. We will first of all discover the techniques to be taken after the Lenovo Ideaphone A6000 has fallen into the water. We will discover in the secondary place the classical errors that the majority of people make.
Steps to follow in cases where your Lenovo Ideaphone A6000 fell into the water
In the event that you want to recover your Lenovo Ideaphone A6000 in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Lenovo Ideaphone A6000 back on after getting out the water
The very first thing to do when the Lenovo Ideaphone A6000 has fallen into the water is to turn off the mobile. In truth, in cases where it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Lenovo Ideaphone A6000 is turned on and wet, you might produce a short circuit and consequently toast the mobile.
Remove detachable components
When the Lenovo Ideaphone A6000 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Lenovo Ideaphone A6000
By using a straw, you will need to suck up the water that is contained in your Lenovo Ideaphone A6000. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Lenovo Ideaphone A6000, you will be ready to start drying it.
Dry the Lenovo Ideaphone A6000
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Lenovo Ideaphone A6000 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Lenovo Ideaphone A6000.
Reassemble the components and turn on the Lenovo Ideaphone A6000
When you have completed the previous steps, your Lenovo Ideaphone A6000 should be dry. So now you can make an attempt to turn on the Lenovo Ideaphone A6000. If perhaps this does not perform, we advise you to hold out a couple of days or to bring the Lenovo Ideaphone A6000 to a repairshop.
What should not be done in cases where the Lenovo Ideaphone A6000 has fallen into the water
There are a number of things not to do when ever your Lenovo Ideaphone A6000 has fallen into the water. The first of all is to make an attempt to turn the mobile back on just after. This can demolish the Lenovo Ideaphone A6000. Next, it is strongly advised not to use a heat source to dry the Lenovo Ideaphone A6000. In fact, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. In fact, it could as well damage the Lenovo Ideaphone A6000.
