Whether in the toilet or in a swimming pool, it from time to time happens that the Landvo Xm100 is dropped in the water. Nevertheless, it’s not simply because a cellphone has fallen in the water that it is inevitably dead. In truth, it is feasible to redo an Landvo Xm100 that has fallen in the water. To do this, it is important to respect certain steps. People often have bad reflexes and this is what can deteriorate the Landvo Xm100. We will first of all discover the methods to be taken after the Landvo Xm100 has fallen into the water. We will discover in the second place the common mistakes that a large number of people make.
Steps to follow in the event that your Landvo Xm100 fell into the water
If you wish to restore your Landvo Xm100 in working order, we recommend that you follow the steps below.
Don’t try to turn the Landvo Xm100 back on after getting out the water
The very first thing to do when the Landvo Xm100 has fallen into the water is to shut off the cellphone. In truth, in the event that it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Landvo Xm100 is turned on and wet, you might make a short circuit and consequently toast the cellphone.
Remove detachable components
Once the Landvo Xm100 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be important to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and continue to the following step.
Aspire the water that is in your Landvo Xm100
Employing a straw, you will need to suck up the water that is contained in your Landvo Xm100. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Landvo Xm100, you will have the ability to start drying it.
Dry the Landvo Xm100
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the cellphone to heat up or damage the cellphone. Once it is done, we advise you to leave the Landvo Xm100 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Landvo Xm100.
Reassemble the components and turn on the Landvo Xm100
When you have completed the prior steps, your Landvo Xm100 should be dry. So now you can try to turn on the Landvo Xm100. If perhaps this does not work, we advise you to wait a few days or to bring the Landvo Xm100 to a repairman.
What should not be done in the event that the Landvo Xm100 has fallen into the water
There are a number of stuff not to do when your Landvo Xm100 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can kill the Landvo Xm100. Next, it is highly advised not to use a heat source to dry the Landvo Xm100. In fact, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. Indeed, it could also damage the Landvo Xm100.
