Whether in the toilet or in a swimming pool, it from time to time happens that the Huawei P9 is dropped into the water. However, it isn’t simply because a telephone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an Huawei P9 that has fallen into the water. To accomplish this, it is essential to respect particular steps. People frequently have bad reflexes and this is what can deteriorate the Huawei P9. We will first see the methods to be taken after the Huawei P9 has fallen into the water. We will see in the 2nd place the common errors that a large number of people make.
Steps to follow if perhaps your Huawei P9 fell into the water
Whenever you need to restore your Huawei P9 in working order, we recommend that you follow the steps listed below.
Do not try to turn the Huawei P9 back on after exiting the water
The very first thing to do when the Huawei P9 has fallen into the water is to turn off the telephone. In fact, if perhaps it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Huawei P9 is turned on and wet, you may make a short circuit and therefore toast the telephone.
Remove detachable components
When the Huawei P9 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Huawei P9
Employing a straw, you must suck up the water that is contained in your Huawei P9. For this, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Huawei P9, you will have the capacity to start drying it.
Dry the Huawei P9
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using methods that cause the telephone to heat up or damage the telephone. When it is performed, we recommend you to leave the Huawei P9 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Huawei P9.
Reassemble the components and turn on the Huawei P9
When you have completed the prior steps, your Huawei P9 should be dry. So now you can make an attempt to turn on the Huawei P9. In the event that this doesn’t do the job, we recommend you to hold out a couple of days or to bring the Huawei P9 to a repairman.
What should not be done if perhaps the Huawei P9 has fallen into the water
There are several stuff not to do when your Huawei P9 has fallen into the water. The first is to make an attempt to turn the telephone back on just after. This can demolish the Huawei P9. Following, it is highly recommended not to use a heat source to dry the Huawei P9. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. Certainly, it could additionally ruin the Huawei P9.
