Whether in the toilet or in a pool, it sometimes occurs that the Huawei P8 is dropped into the water. Nonetheless, it’s not because a phone has fallen into the water that it is obviously dead. In fact, it is possible to redo an Huawei P8 that has fallen into the water. To get this done, it is required to respect specific actions. People frequently have bad reflexes and this is what can damage the Huawei P8. We will first of all see the steps to be taken after the Huawei P8 has fallen into the water. We will see in the secondary place the common mistakes that many people make.
Steps to follow in cases where your Huawei P8 fell into the water
In the event that you need to recover your Huawei P8 in working order, we advise that you follow the steps below.
Don’t attempt to turn the Huawei P8 back on after exiting the water
The very first thing to accomplish when the Huawei P8 has fallen into the water is to turn off the phone. In fact, in cases where it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Huawei P8 is started and wet, you could produce a short circuit and as a result toast the phone.
Remove detachable components
When the Huawei P8 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be required to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your Huawei P8
Employing a straw, you need to suck up the water that is contained in your Huawei P8. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Huawei P8, you will have the capacity to start drying it.
Dry the Huawei P8
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using techniques that cause the phone to heat up or damage the phone. When it is finished, we suggest you to leave the Huawei P8 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Huawei P8.
Reassemble the components and turn on the Huawei P8
When you have completed the previous steps, your Huawei P8 should be dry. So now you can try to turn on the Huawei P8. In the event that this doesn’t function, we suggest you to wait some days or to bring the Huawei P8 to a repairman.
What should not be done in cases where the Huawei P8 has fallen into the water
There are a number of stuff not to accomplish when your Huawei P8 has fallen into the water. The first of all is to try to turn the phone back on just after. This can destroy the Huawei P8. Following, it is highly advised not to use a heat source to dry the Huawei P8. Certainly, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Huawei P8.
