How to fix a water damaged on Huawei P10

Whether in the toilet or in a swimming pool, it sometimes happens that the Huawei P10 is dropped in the water. Even so, it’s not simply because a cellphone has fallen in the water that it is inevitably dead. In truth, it is feasible to redo an Huawei P10 that has fallen in the water. To accomplish this, it is needed to respect specific steps. People typically have bad reflexes and this is what can damage the Huawei P10. We will first of all discover the steps to be taken after the Huawei P10 has fallen into the water. We will discover in the 2nd place the classical errors that many people make.water-damaged-Huawei-P10

Steps to follow if perhaps your Huawei P10 fell into the water

If perhaps you wish to restore your Huawei P10 in working order, we recommend that you follow the steps listed below.

Do not attempt to turn the Huawei P10 back on after exiting the water

The very first thing to perform when the Huawei P10 has fallen into the water is to switch off the cellphone. In truth, if perhaps it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Huawei P10 is turned on and wet, you could generate a short circuit and consequently toast the cellphone.

Remove detachable components

When the Huawei P10 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these items to dry and continue to the next step.

Aspire the water that is in your Huawei P10

Using a straw, you will have to suck up the water that is contained in your Huawei P10. For this, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Huawei P10, you will have the capacity to start drying it.

Dry the Huawei P10

The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the cellphone to heat up or damage the cellphone. When it is done, we advise you to leave the Huawei P10 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Huawei P10.

Reassemble the components and turn on the Huawei P10

When you have completed the prior steps, your Huawei P10 should be dry. So now you can make an attempt to turn on the Huawei P10. In the event that this does not do the job, we advise you to hang on some days or to bring the Huawei P10 to a repairshop.

What should not be done if perhaps the Huawei P10 has fallen into the water

You will find several things not to perform when your Huawei P10 has fallen into the water. The first of all is to make an attempt to turn the cellphone back on just after. This can destroy the Huawei P10. Next, it is strongly suggested not to use a heat source to dry the Huawei P10. Certainly, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could also damage the Huawei P10.