Whether in the toilet or in a pool, it occasionally happens that the Huawei P Smart is dropped into the water. Nonetheless, it is not simply because a cellphone has fallen into the water that it is unavoidably dead. In truth, it is feasible to redo an Huawei P Smart that has fallen into the water. To achieve this, it is essential to respect particular actions. People frequently have bad reflexes and this is what can degrade the Huawei P Smart. We will first discover the steps to be taken after the Huawei P Smart has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Methods to follow if your Huawei P Smart fell into the water
Whenever you wish to recover your Huawei P Smart in working order, we highly recommend that you follow the steps below.
Don’t try to turn the Huawei P Smart back on after getting out the water
The first thing to perform when the Huawei P Smart has fallen into the water is to shut off the cellphone. In truth, if it did not switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Huawei P Smart is turned on and wet, you can generate a short circuit and as a result toast the cellphone.
Remove detachable components
Once the Huawei P Smart is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be essential to remove the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and continue to the next step.
Aspire the water that is in your Huawei P Smart
By using a straw, you will have to suck up the water that is contained in your Huawei P Smart. For this, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Huawei P Smart, you will have the capacity to start drying it.
Dry the Huawei P Smart
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the cellphone to heat up or damage the cellphone. Once it is done, we recommend you to leave the Huawei P Smart in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Huawei P Smart.
Reassemble the components and turn on the Huawei P Smart
When you have completed the prior steps, your Huawei P Smart should be dry. So now you can try to turn on the Huawei P Smart. If perhaps this doesn’t perform, we recommend you to hold out a few days or to bring the Huawei P Smart to a repairshop.
What should not be done if the Huawei P Smart has fallen into the water
You will find a number of things not to perform when ever your Huawei P Smart has fallen into the water. The first is to try to turn the cellphone back on just after. This can demolish the Huawei P Smart. Following, it is highly suggested not to use a heat source to dry the Huawei P Smart. Without a doubt, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could as well ruin the Huawei P Smart.
