Whether in the toilet or in a pool, it sometimes happens that the Huawei MediaPad T3 is slipped into the water. Nonetheless, it is not because a phone has fallen into the water that it is unavoidably dead. Certainly, it is possible to redo an Huawei MediaPad T3 that has fallen into the water. To accomplish this, it is important to respect specific steps. People often have bad reflexes and this is what can damage the Huawei MediaPad T3. We will first see the methods to be taken after the Huawei MediaPad T3 has fallen into the water. We will see in the second place the common mistakes that most people make.
Methods to follow if perhaps your Huawei MediaPad T3 fell into the water
If perhaps you desire to restore your Huawei MediaPad T3 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Huawei MediaPad T3 back on after exiting the water
One thing to do when the Huawei MediaPad T3 has fallen into the water is to switch off the phone. Certainly, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Huawei MediaPad T3 is turned on and wet, you can create a short circuit and as a result toast the phone.
Remove detachable components
When the Huawei MediaPad T3 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will probably be important to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Huawei MediaPad T3
Employing a straw, you will need to suck up the water that is contained in your Huawei MediaPad T3. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Huawei MediaPad T3, you will be able to start drying it.
Dry the Huawei MediaPad T3
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the Huawei MediaPad T3 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Huawei MediaPad T3.
Reassemble the components and turn on the Huawei MediaPad T3
When you have completed the previous steps, your Huawei MediaPad T3 should be dry. So now you can make an attempt to turn on the Huawei MediaPad T3. If this doesn’t work, we suggest you to hang on a couple of days or to bring the Huawei MediaPad T3 to a repairshop.
What should not be done if perhaps the Huawei MediaPad T3 has fallen into the water
You will find several things not to do when your Huawei MediaPad T3 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can kill the Huawei MediaPad T3. Following, it is strongly recommended not to use a heat source to dry the Huawei MediaPad T3. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Certainly, it could likewise damage the Huawei MediaPad T3.