Whether in the toilet or in a pool, it sometimes occurs that the Huawei MediaPad M2 is dropped in the water. However, it’s not simply because a mobile has fallen in the water that it is undoubtedly dead. Certainly, it is possible to redo an Huawei MediaPad M2 that has fallen in the water. To do this, it is needed to respect certain actions. People generally have bad reflexes and this is what can degrade the Huawei MediaPad M2. We will first discover the methods to be taken after the Huawei MediaPad M2 has fallen into the water. We will discover in the 2nd place the common mistakes that a good number of people make.
Steps to follow if perhaps your Huawei MediaPad M2 fell into the water
Whenever you want to recover your Huawei MediaPad M2 in operating order, we advise that you follow the steps below.
Don’t try to turn the Huawei MediaPad M2 back on after getting out the water
The very first thing to accomplish when the Huawei MediaPad M2 has fallen into the water is to shut off the mobile. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Huawei MediaPad M2 is switched on and wet, you may generate a short circuit and therefore toast the mobile.
Remove detachable components
Once the Huawei MediaPad M2 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Huawei MediaPad M2
Employing a straw, you have got to suck up the water that is contained in your Huawei MediaPad M2. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Huawei MediaPad M2, you will have the capacity to start drying it.
Dry the Huawei MediaPad M2
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the Huawei MediaPad M2 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Huawei MediaPad M2.
Reassemble the components and turn on the Huawei MediaPad M2
When you have completed the previous steps, your Huawei MediaPad M2 should be dry. So now you can make an attempt to turn on the Huawei MediaPad M2. In the event that this does not do the job, we suggest you to hold out some days or to bring the Huawei MediaPad M2 to a repairshop.
What should not be done if perhaps the Huawei MediaPad M2 has fallen into the water
There are several stuff not to accomplish when ever your Huawei MediaPad M2 has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can demolish the Huawei MediaPad M2. Following, it is highly recommended not to use a heat source to dry the Huawei MediaPad M2. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. In fact, it could likewise damage the Huawei MediaPad M2.
