How to fix a water damaged on Huawei Ascend Y600

Whether in the toilet or in a pool, it from time to time occurs that the Huawei Ascend Y600 is slipped into the water. On the other hand, it isn’t simply because a phone has fallen into the water that it’s obviously dead. In fact, it is possible to redo an Huawei Ascend Y600 that has fallen into the water. To do this, it is important to respect certain actions. People typically have bad reflexes and this is what can deteriorate the Huawei Ascend Y600. We will 1st discover the techniques to be taken after the Huawei Ascend Y600 has fallen into the water. We will discover in the 2nd place the classical errors that the majority of people make.water-damaged-Huawei-Ascend-Y600

Methods to follow in cases where your Huawei Ascend Y600 fell into the water

Whenever you desire to recover your Huawei Ascend Y600 in operating order, we advise that you follow the steps listed below.

Do not try to turn the Huawei Ascend Y600 back on after getting out the water

One thing to do when the Huawei Ascend Y600 has fallen into the water is to turn off the phone. In fact, in cases where it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Huawei Ascend Y600 is switched on and wet, you might generate a short circuit and consequently toast the phone.

Remove detachable components

When the Huawei Ascend Y600 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Huawei Ascend Y600

Employing a straw, you will need to suck up the water that is contained in your Huawei Ascend Y600. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Huawei Ascend Y600, you will be able to start drying it.

Dry the Huawei Ascend Y600

The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the phone to heat up or damage the phone. When it is done, we advise you to leave the Huawei Ascend Y600 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Huawei Ascend Y600.

Reassemble the components and turn on the Huawei Ascend Y600

When you have completed the previous steps, your Huawei Ascend Y600 should be dry. So now you can make an attempt to turn on the Huawei Ascend Y600. If this does not perform, we advise you to hang on a couple of days or to bring the Huawei Ascend Y600 to a repairshop.

What should not be done in cases where the Huawei Ascend Y600 has fallen into the water

You will find several points not to do when your Huawei Ascend Y600 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can destroy the Huawei Ascend Y600. Next, it is strongly recommended not to use a heat source to dry the Huawei Ascend Y600. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Indeed, it could additionally ruin the Huawei Ascend Y600.