Whether in the toilet or in a pool, it from time to time happens that the Huawei Ascend P6 is dropped into the water. Nevertheless, it’s not because a phone has fallen into the water that it’s obviously dead. Certainly, it is possible to redo an Huawei Ascend P6 that has fallen into the water. To get this done, it is required to respect certain actions. People generally have bad reflexes and this is what can degrade the Huawei Ascend P6. We will first see the techniques to be taken after the Huawei Ascend P6 has fallen into the water. We will see in the secondary place the common errors that the majority of people make.
Steps to follow if your Huawei Ascend P6 fell into the water
If perhaps you need to restore your Huawei Ascend P6 in operating order, we highly recommend that you follow the steps below.
Do not attempt to turn the Huawei Ascend P6 back on after exiting the water
The first thing to accomplish when the Huawei Ascend P6 has fallen into the water is to switch off the phone. Certainly, if it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Huawei Ascend P6 is switched on and wet, you can produce a short circuit and as a result toast the phone.
Remove detachable components
Once the Huawei Ascend P6 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Huawei Ascend P6
Utilizing a straw, you need to suck up the water that is contained in your Huawei Ascend P6. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Huawei Ascend P6, you will be ready to start drying it.
Dry the Huawei Ascend P6
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is completed, we recommend you to leave the Huawei Ascend P6 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Huawei Ascend P6.
Reassemble the components and turn on the Huawei Ascend P6
When you have completed the previous steps, your Huawei Ascend P6 should be dry. So now you can make an attempt to turn on the Huawei Ascend P6. In the event that this doesn’t do the job, we recommend you to wait a few days or to bring the Huawei Ascend P6 to a repairman.
What should not be done if the Huawei Ascend P6 has fallen into the water
You will find several stuff not to accomplish when ever your Huawei Ascend P6 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can demolish the Huawei Ascend P6. Following, it is strongly suggested not to use a heat source to dry the Huawei Ascend P6. Indeed, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could likewise damage the Huawei Ascend P6.
