Whether in the wc or in a pool, it sometimes happens that the HTC One is dropped in the water. However, it isn’t simply because a telephone has fallen in the water that it is unavoidably dead. In fact, it is feasible to redo an HTC One that has fallen in the water. To do this, it is needed to respect specific steps. People generally have bad reflexes and this is what can damage the HTC One. We will 1st discover the techniques to be taken after the HTC One has fallen into the water. We will discover in the secondary place the common errors that many people make.
Steps to follow if your HTC One fell into the water
If you want to recover your HTC One in operating order, we recommend that you follow the steps listed below.
Do not try to turn the HTC One back on after exiting the water
The first thing to do when the HTC One has fallen into the water is to switch off the telephone. In fact, if it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the HTC One is turned on and wet, you can produce a short circuit and consequently toast the telephone.
Remove detachable components
Once the HTC One is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be needed to remove the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your HTC One
By using a straw, you will have to suck up the water that is contained in your HTC One. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your HTC One, you will have the ability to start drying it.
Dry the HTC One
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. Once it is performed, we advise you to leave the HTC One in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the HTC One.
Reassemble the components and turn on the HTC One
When you have completed the prior steps, your HTC One should be dry. So now you can make an attempt to turn on the HTC One. In the event that this doesn’t function, we advise you to wait some days or to bring the HTC One to a repairman.
What should not be done if the HTC One has fallen into the water
You will find a number of points not to do when ever your HTC One has fallen into the water. The 1st is to make an attempt to turn the telephone back on just after. This can kill the HTC One. Next, it is strongly advised not to use a heat source to dry the HTC One. Without a doubt, techniques such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the HTC One.
