Whether in the wc or in a pool, it sometimes occurs that the HTC Evo 3D is dropped in the water. Nonetheless, it isn’t because a mobile phone has fallen in the water that it is inevitably dead. Indeed, it is possible to redo an HTC Evo 3D that has fallen in the water. To get this done, it is required to respect particular steps. People typically have bad reflexes and this is what can degrade the HTC Evo 3D. We will first discover the methods to be taken after the HTC Evo 3D has fallen into the water. We will discover in the secondary place the common mistakes that a good number of people make.
Methods to follow in cases where your HTC Evo 3D fell into the water
If you want to recover your HTC Evo 3D in working order, we suggest that you follow the steps below.
Do not try to turn the HTC Evo 3D back on after getting out the water
The first thing to accomplish when the HTC Evo 3D has fallen into the water is to turn off the mobile phone. Indeed, in cases where it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the HTC Evo 3D is started and wet, you might make a short circuit and as a result toast the mobile phone.
Remove detachable components
When the HTC Evo 3D is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your HTC Evo 3D
By using a straw, you have got to suck up the water that is contained in your HTC Evo 3D. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your HTC Evo 3D, you will have the ability to start drying it.
Dry the HTC Evo 3D
The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile phone to heat up or damage the mobile phone. When it is finished, we suggest you to leave the HTC Evo 3D in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the HTC Evo 3D.
Reassemble the components and turn on the HTC Evo 3D
When you have completed the prior steps, your HTC Evo 3D should be dry. So now you can make an attempt to turn on the HTC Evo 3D. In the event that this does not function, we suggest you to hold out a few days or to bring the HTC Evo 3D to a repairshop.
What should not be done in cases where the HTC Evo 3D has fallen into the water
There are a number of things not to accomplish when ever your HTC Evo 3D has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can kill the HTC Evo 3D. Next, it is strongly recommended not to use a heat source to dry the HTC Evo 3D. Without a doubt, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could likewise ruin the HTC Evo 3D.
