Whether in the toilet or in a swimming pool, it sometimes happens that the Hisense L675 is dropped into the water. On the other hand, it isn’t because a phone has fallen into the water that it is unavoidably dead. Certainly, it is possible to redo an Hisense L675 that has fallen into the water. To get this done, it is needed to respect certain actions. People generally have bad reflexes and this is what can degrade the Hisense L675. We will first of all see the steps to be taken after the Hisense L675 has fallen into the water. We will see in the second place the common errors that most people make.
Steps to follow in cases where your Hisense L675 fell into the water
If you want to recover your Hisense L675 in working order, we recommend that you follow the steps below.
Do not try to turn the Hisense L675 back on after exiting the water
The first thing to perform when the Hisense L675 has fallen into the water is to shut off the phone. Certainly, in cases where it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Hisense L675 is switched on and wet, you might generate a short circuit and as a result toast the phone.
Remove detachable components
Once the Hisense L675 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Hisense L675
By using a straw, you have got to suck up the water that is contained in your Hisense L675. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Hisense L675, you will have the capacity to start drying it.
Dry the Hisense L675
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is performed, we suggest you to leave the Hisense L675 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Hisense L675.
Reassemble the components and turn on the Hisense L675
When you have completed the previous steps, your Hisense L675 should be dry. So now you can try to turn on the Hisense L675. If perhaps this does not perform, we suggest you to hang on a couple of days or to bring the Hisense L675 to a repairshop.
What should not be done in cases where the Hisense L675 has fallen into the water
There are a number of points not to perform when ever your Hisense L675 has fallen into the water. The first of all is to try to turn the phone back on just after. This can destroy the Hisense L675. Next, it is highly recommended not to use a heat source to dry the Hisense L675. In fact, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Certainly, it could likewise ruin the Hisense L675.
