How to fix a water damaged on Google Project Ara

Whether in the wc or in a swimming pool, it occasionally happens that the Google Project Ara is dropped into the water. Nevertheless, it’s not simply because a telephone has fallen into the water that it is inevitably dead. In fact, it is possible to redo an Google Project Ara that has fallen into the water. To achieve this, it is necessary to respect particular actions. People often have bad reflexes and this is what can deteriorate the Google Project Ara. We will 1st see the steps to be taken after the Google Project Ara has fallen into the water. We will see in the secondary place the classical mistakes that the majority of people make.water-damaged-Google-Project-Ara

Methods to follow if perhaps your Google Project Ara fell into the water

Whenever you want to recover your Google Project Ara in working order, we recommend that you follow the steps listed below.

Do not try to turn the Google Project Ara back on after exiting the water

The very first thing to accomplish when the Google Project Ara has fallen into the water is to turn off the telephone. In fact, if perhaps it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Google Project Ara is switched on and wet, you can generate a short circuit and therefore toast the telephone.

Remove detachable components

When the Google Project Ara is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Google Project Ara

Utilizing a straw, you will have to suck up the water that is contained in your Google Project Ara. For doing it, you merely need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Google Project Ara, you will be able to start drying it.

Dry the Google Project Ara

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using techniques that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the Google Project Ara in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Google Project Ara.

Reassemble the components and turn on the Google Project Ara

When you have completed the prior steps, your Google Project Ara should be dry. So now you can try to turn on the Google Project Ara. In the event that this doesn’t work, we advise you to hang on a few days or to bring the Google Project Ara to a repairshop.

What should not be done if perhaps the Google Project Ara has fallen into the water

You will find several stuff not to accomplish when ever your Google Project Ara has fallen into the water. The 1st is to try to turn the telephone back on just after. This can kill the Google Project Ara. Following, it is strongly recommended not to use a heat source to dry the Google Project Ara. Certainly, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the telephone, do not shake it. In fact, it could likewise ruin the Google Project Ara.