Whether in the toilet or in a swimming pool, it from time to time occurs that the Essential PH-1 is dropped in the water. On the other hand, it’s not simply because a cellphone has fallen in the water that it is obviously dead. Certainly, it is feasible to redo an Essential PH-1 that has fallen in the water. To get this done, it is required to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Essential PH-1. We will first discover the techniques to be taken after the Essential PH-1 has fallen into the water. We will discover in the secondary place the common mistakes that many people make.
Methods to follow if your Essential PH-1 fell into the water
In the event that you need to recover your Essential PH-1 in operating order, we suggest that you follow the steps below.
Don’t try to turn the Essential PH-1 back on after exiting the water
The very first thing to perform when the Essential PH-1 has fallen into the water is to switch off the cellphone. Certainly, if it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Essential PH-1 is switched on and wet, you can produce a short circuit and as a result toast the cellphone.
Remove detachable components
When the Essential PH-1 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Essential PH-1
Employing a straw, you will need to suck up the water that is contained in your Essential PH-1. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Essential PH-1, you will have the capacity to start drying it.
Dry the Essential PH-1
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the cellphone to heat up or damage the cellphone. When it is completed, we advise you to leave the Essential PH-1 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Essential PH-1.
Reassemble the components and turn on the Essential PH-1
When you have completed the previous steps, your Essential PH-1 should be dry. So now you can try to turn on the Essential PH-1. In the event that this does not perform, we advise you to wait a few days or to bring the Essential PH-1 to a repairshop.
What should not be done if the Essential PH-1 has fallen into the water
You will find several things not to perform when your Essential PH-1 has fallen into the water. The first is to try to turn the cellphone back on just after. This can destroy the Essential PH-1. Next, it is highly suggested not to use a heat source to dry the Essential PH-1. Without a doubt, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the cellphone, do not shake it. In fact, it could also ruin the Essential PH-1.
