Whether in the wc or in a pool, it occasionally occurs that the Energizer Energy 500 is dropped into the water. However, it is not because a mobile phone has fallen into the water that it’s undoubtedly dead. In fact, it is possible to redo an Energizer Energy 500 that has fallen into the water. To accomplish this, it is needed to respect particular actions. People typically have bad reflexes and this is what can deteriorate the Energizer Energy 500. We will first of all see the methods to be taken after the Energizer Energy 500 has fallen into the water. We will see in the 2nd place the common errors that many people make.
Methods to follow in the event that your Energizer Energy 500 fell into the water
If you need to recover your Energizer Energy 500 in working order, we highly recommend that you follow the steps below.
Do not try to turn the Energizer Energy 500 back on after exiting the water
One thing to accomplish when the Energizer Energy 500 has fallen into the water is to switch off the mobile phone. In fact, in the event that it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Energizer Energy 500 is turned on and wet, you can generate a short circuit and therefore toast the mobile phone.
Remove detachable components
When the Energizer Energy 500 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will probably be needed to take out the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and continue to the next step.
Aspire the water that is in your Energizer Energy 500
Using a straw, you have got to suck up the water that is contained in your Energizer Energy 500. For doing it, you just need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Energizer Energy 500, you will have the ability to start drying it.
Dry the Energizer Energy 500
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using methods that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Energizer Energy 500 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Energizer Energy 500.
Reassemble the components and turn on the Energizer Energy 500
When you have completed the prior steps, your Energizer Energy 500 should be dry. So now you can make an attempt to turn on the Energizer Energy 500. In the event that this doesn’t perform, we recommend you to hang on a couple of days or to bring the Energizer Energy 500 to a repairman.
What should not be done in the event that the Energizer Energy 500 has fallen into the water
There are several things not to accomplish when your Energizer Energy 500 has fallen into the water. The first of all is to make an attempt to turn the mobile phone back on just after. This can destroy the Energizer Energy 500. Next, it is strongly recommended not to use a heat source to dry the Energizer Energy 500. Certainly, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. Certainly, it could additionally damage the Energizer Energy 500.
