Whether in the wc or in a pool, it occasionally occurs that the Doogee Y300 is slipped into the water. However, it’s not simply because a phone has fallen into the water that it’s unavoidably dead. Certainly, it is possible to redo an Doogee Y300 that has fallen into the water. To get this done, it is essential to respect specific actions. People generally have bad reflexes and this is what can deteriorate the Doogee Y300. We will 1st discover the techniques to be taken after the Doogee Y300 has fallen into the water. We will discover in the second place the common mistakes that most people make.
Steps to follow if your Doogee Y300 fell into the water
If you need to restore your Doogee Y300 in working order, we advise that you follow the steps listed below.
Don’t try to turn the Doogee Y300 back on after getting out the water
The first thing to do when the Doogee Y300 has fallen into the water is to turn off the phone. Certainly, if it did not switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Doogee Y300 is turned on and wet, you could create a short circuit and consequently toast the phone.
Remove detachable components
Once the Doogee Y300 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be essential to take away the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Doogee Y300
Employing a straw, you need to suck up the water that is contained in your Doogee Y300. For this, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Doogee Y300, you will be ready to start drying it.
Dry the Doogee Y300
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. Once it is completed, we recommend you to leave the Doogee Y300 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Doogee Y300.
Reassemble the components and turn on the Doogee Y300
When you have completed the previous steps, your Doogee Y300 should be dry. So now you can make an attempt to turn on the Doogee Y300. If this does not perform, we recommend you to hang on a couple of days or to bring the Doogee Y300 to a repairman.
What should not be done if the Doogee Y300 has fallen into the water
There are several stuff not to do when ever your Doogee Y300 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can destroy the Doogee Y300. Following, it is highly suggested not to use a heat source to dry the Doogee Y300. Certainly, solutions such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could as well damage the Doogee Y300.
