Whether in the toilet or in a swimming pool, it from time to time occurs that the Doogee X6 is dropped into the water. However, it is not simply because a phone has fallen into the water that it’s inevitably dead. In fact, it is feasible to redo an Doogee X6 that has fallen into the water. To accomplish this, it is required to respect particular steps. People often have bad reflexes and this is what can deteriorate the Doogee X6. We will first discover the techniques to be taken after the Doogee X6 has fallen into the water. We will discover in the secondary place the classical errors that the majority of people make.
Methods to follow if your Doogee X6 fell into the water
If you need to restore your Doogee X6 in working order, we suggest that you follow the steps below.
Do not attempt to turn the Doogee X6 back on after exiting the water
One thing to accomplish when the Doogee X6 has fallen into the water is to switch off the phone. In fact, if it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Doogee X6 is switched on and wet, you might produce a short circuit and consequently toast the phone.
Remove detachable components
Once the Doogee X6 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Doogee X6
Employing a straw, you have got to suck up the water that is contained in your Doogee X6. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Doogee X6, you will be ready to start drying it.
Dry the Doogee X6
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the phone to heat up or damage the phone. Once it is performed, we suggest you to leave the Doogee X6 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Doogee X6.
Reassemble the components and turn on the Doogee X6
When you have completed the previous steps, your Doogee X6 should be dry. So now you can make an attempt to turn on the Doogee X6. In the event that this does not work, we suggest you to hold out a few days or to bring the Doogee X6 to a repairshop.
What should not be done if the Doogee X6 has fallen into the water
There are several stuff not to accomplish when your Doogee X6 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Doogee X6. Following, it is highly recommended not to use a heat source to dry the Doogee X6. Certainly, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could as well damage the Doogee X6.
