How to fix a water damaged on CUBOT Note S

Whether in the toilet or in a swimming pool, it sometimes occurs that the CUBOT Note S is dropped in the water. Nonetheless, it isn’t simply because a telephone has fallen in the water that it is undoubtedly dead. In fact, it is possible to redo an CUBOT Note S that has fallen in the water. To achieve this, it is necessary to respect specific steps. People typically have bad reflexes and this is what can damage the CUBOT Note S. We will first of all discover the methods to be taken after the CUBOT Note S has fallen into the water. We will discover in the 2nd place the common mistakes that a good number of people make.water-damaged-CUBOT-Note-S

Steps to follow in the event that your CUBOT Note S fell into the water

If perhaps you need to recover your CUBOT Note S in working order, we suggest that you follow the steps listed below.

Don’t try to turn the CUBOT Note S back on after getting out the water

The very first thing to perform when the CUBOT Note S has fallen into the water is to switch off the telephone. In fact, in the event that it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the CUBOT Note S is switched on and wet, you could produce a short circuit and therefore toast the telephone.

Remove detachable components

When the CUBOT Note S is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be necessary to take out the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and proceed to the following step.

Aspire the water that is in your CUBOT Note S

Using a straw, you need to suck up the water that is contained in your CUBOT Note S. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your CUBOT Note S, you will be ready to start drying it.

Dry the CUBOT Note S

The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the CUBOT Note S in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the CUBOT Note S.

Reassemble the components and turn on the CUBOT Note S

When you have completed the previous steps, your CUBOT Note S should be dry. So now you can make an attempt to turn on the CUBOT Note S. In the event that this doesn’t perform, we advise you to hang on a few days or to bring the CUBOT Note S to a repairshop.

What should not be done in the event that the CUBOT Note S has fallen into the water

There are several things not to perform when ever your CUBOT Note S has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can destroy the CUBOT Note S. Next, it is highly advised not to use a heat source to dry the CUBOT Note S. Certainly, methods which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could likewise ruin the CUBOT Note S.