How to fix a water damaged on Crosscall

Whether in the wc or in a swimming pool, it from time to time occurs that the Crosscall is dropped into the water. Nonetheless, it’s not simply because a mobile phone has fallen into the water that it’s undoubtedly dead. In truth, it is feasible to redo an Crosscall that has fallen into the water. To do this, it is required to respect specific actions. People frequently have bad reflexes and this is what can deteriorate the Crosscall. We will first of all see the methods to be taken after the Crosscall has fallen into the water. We will see in the secondary place the common errors that many people make.water-damaged-Crosscall

Steps to follow in cases where your Crosscall fell into the water

In the event that you wish to restore your Crosscall in working order, we recommend that you follow the steps listed below.

Don’t try to turn the Crosscall back on after getting out the water

The first thing to do when the Crosscall has fallen into the water is to turn off the mobile phone. In truth, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Crosscall is started and wet, you may create a short circuit and consequently toast the mobile phone.

Remove detachable components

Once the Crosscall is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be required to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and proceed to the next step.

Aspire the water that is in your Crosscall

Employing a straw, you must suck up the water that is contained in your Crosscall. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Crosscall, you will have the capacity to start drying it.

Dry the Crosscall

The fourth step is to dry the mobile phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile phone to heat up or damage the mobile phone. Once it is completed, we suggest you to leave the Crosscall in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the Crosscall.

Reassemble the components and turn on the Crosscall

When you have completed the previous steps, your Crosscall should be dry. So now you can try to turn on the Crosscall. If perhaps this does not work, we suggest you to hang on a couple of days or to bring the Crosscall to a repairshop.

What should not be done in cases where the Crosscall has fallen into the water

You will find several stuff not to do when ever your Crosscall has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can destroy the Crosscall. Next, it is highly advised not to use a heat source to dry the Crosscall. Certainly, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could likewise ruin the Crosscall.