Whether in the wc or in a swimming pool, it sometimes happens that the Crosscall TREKKER-X2 is dropped in the water. Nevertheless, it isn’t because a phone has fallen in the water that it’s undoubtedly dead. Indeed, it is possible to redo an Crosscall TREKKER-X2 that has fallen in the water. To accomplish this, it is required to respect certain actions. People typically have bad reflexes and this is what can degrade the Crosscall TREKKER-X2. We will 1st discover the methods to be taken after the Crosscall TREKKER-X2 has fallen into the water. We will discover in the second place the common errors that the majority of people make.
Steps to follow in cases where your Crosscall TREKKER-X2 fell into the water
Whenever you wish to recover your Crosscall TREKKER-X2 in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Crosscall TREKKER-X2 back on after exiting the water
The very first thing to do when the Crosscall TREKKER-X2 has fallen into the water is to shut off the phone. Indeed, in cases where it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Crosscall TREKKER-X2 is turned on and wet, you could create a short circuit and consequently toast the phone.
Remove detachable components
Once the Crosscall TREKKER-X2 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will probably be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Crosscall TREKKER-X2
Employing a straw, you must suck up the water that is contained in your Crosscall TREKKER-X2. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Crosscall TREKKER-X2, you will be able to start drying it.
Dry the Crosscall TREKKER-X2
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is done, we recommend you to leave the Crosscall TREKKER-X2 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Crosscall TREKKER-X2.
Reassemble the components and turn on the Crosscall TREKKER-X2
When you have completed the previous steps, your Crosscall TREKKER-X2 should be dry. So now you can try to turn on the Crosscall TREKKER-X2. If this doesn’t work, we recommend you to hold out a couple of days or to bring the Crosscall TREKKER-X2 to a repairshop.
What should not be done in cases where the Crosscall TREKKER-X2 has fallen into the water
There are a number of things not to do when ever your Crosscall TREKKER-X2 has fallen into the water. The 1st is to try to turn the phone back on just after. This can destroy the Crosscall TREKKER-X2. Next, it is strongly advised not to use a heat source to dry the Crosscall TREKKER-X2. In fact, solutions such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. Indeed, it could also damage the Crosscall TREKKER-X2.
