How to fix a water damaged on Crosscall TREKKER-X1

Whether in the wc or in a swimming pool, it occasionally happens that the Crosscall TREKKER-X1 is slipped into the water. Even so, it’s not simply because a mobile phone has fallen into the water that it is obviously dead. Certainly, it is possible to redo an Crosscall TREKKER-X1 that has fallen into the water. To achieve this, it is required to respect specific actions. People generally have bad reflexes and this is what can degrade the Crosscall TREKKER-X1. We will first see the methods to be taken after the Crosscall TREKKER-X1 has fallen into the water. We will see in the 2nd place the common mistakes that most people make.water-damaged-Crosscall-TREKKER-X1

Steps to follow in cases where your Crosscall TREKKER-X1 fell into the water

If you want to restore your Crosscall TREKKER-X1 in working order, we highly recommend that you follow the steps below.

Don’t attempt to turn the Crosscall TREKKER-X1 back on after exiting the water

The very first thing to do when the Crosscall TREKKER-X1 has fallen into the water is to turn off the mobile phone. Certainly, in cases where it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Crosscall TREKKER-X1 is started and wet, you might create a short circuit and as a result toast the mobile phone.

Remove detachable components

When the Crosscall TREKKER-X1 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and proceed to the following step.

Aspire the water that is in your Crosscall TREKKER-X1

By using a straw, you will need to suck up the water that is contained in your Crosscall TREKKER-X1. For this, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Crosscall TREKKER-X1, you will be able to start drying it.

Dry the Crosscall TREKKER-X1

The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile phone to heat up or damage the mobile phone. When it is completed, we advise you to leave the Crosscall TREKKER-X1 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Crosscall TREKKER-X1.

Reassemble the components and turn on the Crosscall TREKKER-X1

When you have completed the previous steps, your Crosscall TREKKER-X1 should be dry. So now you can make an attempt to turn on the Crosscall TREKKER-X1. In the event that this doesn’t function, we advise you to hold out a few days or to bring the Crosscall TREKKER-X1 to a repairman.

What should not be done in cases where the Crosscall TREKKER-X1 has fallen into the water

You will find several stuff not to do when ever your Crosscall TREKKER-X1 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can demolish the Crosscall TREKKER-X1. Following, it is strongly advised not to use a heat source to dry the Crosscall TREKKER-X1. In fact, techniques which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile phone, do not shake it. Certainly, it could as well damage the Crosscall TREKKER-X1.