Whether in the toilet or in a swimming pool, it occasionally occurs that the Crosscall CORE X3 is dropped in the water. However, it isn’t because a mobile has fallen in the water that it’s undoubtedly dead. In truth, it is possible to redo an Crosscall CORE X3 that has fallen in the water. To get this done, it is important to respect certain actions. People frequently have bad reflexes and this is what can degrade the Crosscall CORE X3. We will first of all discover the techniques to be taken after the Crosscall CORE X3 has fallen into the water. We will discover in the 2nd place the common errors that many people make.
Methods to follow in cases where your Crosscall CORE X3 fell into the water
If perhaps you need to recover your Crosscall CORE X3 in working order, we advise that you follow the steps below.
Do not attempt to turn the Crosscall CORE X3 back on after exiting the water
The first thing to do when the Crosscall CORE X3 has fallen into the water is to turn off the mobile. In truth, in cases where it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Crosscall CORE X3 is started and wet, you could produce a short circuit and therefore toast the mobile.
Remove detachable components
Once the Crosscall CORE X3 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will be important to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Crosscall CORE X3
Using a straw, you will need to suck up the water that is contained in your Crosscall CORE X3. For this, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Crosscall CORE X3, you will have the ability to start drying it.
Dry the Crosscall CORE X3
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. Once it is completed, we suggest you to leave the Crosscall CORE X3 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Crosscall CORE X3.
Reassemble the components and turn on the Crosscall CORE X3
When you have completed the previous steps, your Crosscall CORE X3 should be dry. So now you can try to turn on the Crosscall CORE X3. If perhaps this does not perform, we suggest you to wait some days or to bring the Crosscall CORE X3 to a repairman.
What should not be done in cases where the Crosscall CORE X3 has fallen into the water
You will find a number of points not to do when ever your Crosscall CORE X3 has fallen into the water. The first of all is to try to turn the mobile back on just after. This can kill the Crosscall CORE X3. Following, it is highly advised not to use a heat source to dry the Crosscall CORE X3. Without a doubt, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. Certainly, it could as well damage the Crosscall CORE X3.
