Whether in the wc or in a swimming pool, it sometimes happens that the Crosscall ACTION X3 is dropped in the water. Even so, it’s not simply because a phone has fallen in the water that it’s unavoidably dead. In truth, it is possible to redo an Crosscall ACTION X3 that has fallen in the water. To accomplish this, it is essential to respect certain actions. People often have bad reflexes and this is what can damage the Crosscall ACTION X3. We will first see the steps to be taken after the Crosscall ACTION X3 has fallen into the water. We will see in the secondary place the common mistakes that most people make.
Steps to follow in the event that your Crosscall ACTION X3 fell into the water
In the event that you wish to restore your Crosscall ACTION X3 in working order, we suggest that you follow the steps below.
Don’t try to turn the Crosscall ACTION X3 back on after exiting the water
The very first thing to perform when the Crosscall ACTION X3 has fallen into the water is to switch off the phone. In truth, in the event that it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Crosscall ACTION X3 is switched on and wet, you may generate a short circuit and as a result toast the phone.
Remove detachable components
When the Crosscall ACTION X3 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be essential to take out the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Crosscall ACTION X3
By using a straw, you must suck up the water that is contained in your Crosscall ACTION X3. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Crosscall ACTION X3, you will be ready to start drying it.
Dry the Crosscall ACTION X3
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using méthodes that cause the phone to heat up or damage the phone. When it is finished, we suggest you to leave the Crosscall ACTION X3 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Crosscall ACTION X3.
Reassemble the components and turn on the Crosscall ACTION X3
When you have completed the prior steps, your Crosscall ACTION X3 should be dry. So now you can make an attempt to turn on the Crosscall ACTION X3. If this doesn’t do the job, we suggest you to wait a couple of days or to bring the Crosscall ACTION X3 to a repairman.
What should not be done in the event that the Crosscall ACTION X3 has fallen into the water
You will find several things not to perform when your Crosscall ACTION X3 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can demolish the Crosscall ACTION X3. Next, it is highly suggested not to use a heat source to dry the Crosscall ACTION X3. Indeed, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could additionally ruin the Crosscall ACTION X3.
