Whether in the toilet or in a swimming pool, it occasionally occurs that the Condor GRIFFE T6 is slipped in the water. On the other hand, it’s not simply because a cellphone has fallen in the water that it’s inevitably dead. In fact, it is feasible to redo an Condor GRIFFE T6 that has fallen in the water. To get this done, it is needed to respect certain steps. People typically have bad reflexes and this is what can deteriorate the Condor GRIFFE T6. We will first of all discover the methods to be taken after the Condor GRIFFE T6 has fallen into the water. We will discover in the second place the common errors that a good number of people make.
Steps to follow in cases where your Condor GRIFFE T6 fell into the water
If you wish to recover your Condor GRIFFE T6 in working order, we recommend that you follow the steps below.
Don’t attempt to turn the Condor GRIFFE T6 back on after exiting the water
One thing to do when the Condor GRIFFE T6 has fallen into the water is to switch off the cellphone. In fact, in cases where it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Condor GRIFFE T6 is switched on and wet, you could create a short circuit and therefore toast the cellphone.
Remove detachable components
When the Condor GRIFFE T6 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Condor GRIFFE T6
Using a straw, you need to suck up the water that is contained in your Condor GRIFFE T6. For this, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Condor GRIFFE T6, you will have the capacity to start drying it.
Dry the Condor GRIFFE T6
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the cellphone to heat up or damage the cellphone. When it is performed, we recommend you to leave the Condor GRIFFE T6 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Condor GRIFFE T6.
Reassemble the components and turn on the Condor GRIFFE T6
When you have completed the previous steps, your Condor GRIFFE T6 should be dry. So now you can try to turn on the Condor GRIFFE T6. If perhaps this doesn’t function, we recommend you to wait a few days or to bring the Condor GRIFFE T6 to a repairman.
What should not be done in cases where the Condor GRIFFE T6 has fallen into the water
There are a number of points not to do when ever your Condor GRIFFE T6 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can destroy the Condor GRIFFE T6. Following, it is highly suggested not to use a heat source to dry the Condor GRIFFE T6. In fact, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could additionally damage the Condor GRIFFE T6.
