How to fix a water damaged on Condor Allure M3

Whether in the wc or in a swimming pool, it from time to time occurs that the Condor Allure M3 is dropped into the water. However, it is not simply because a telephone has fallen into the water that it’s obviously dead. Indeed, it is possible to redo an Condor Allure M3 that has fallen into the water. To get this done, it is needed to respect specific actions. People generally have bad reflexes and this is what can degrade the Condor Allure M3. We will 1st discover the methods to be taken after the Condor Allure M3 has fallen into the water. We will discover in the second place the classical errors that most people make.water-damaged-condor-allure-m3

Methods to follow if perhaps your Condor Allure M3 fell into the water

If you want to restore your Condor Allure M3 in operating order, we advise that you follow the steps below.

Do not attempt to turn the Condor Allure M3 back on after exiting the water

The very first thing to perform when the Condor Allure M3 has fallen into the water is to turn off the telephone. Indeed, if perhaps it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Condor Allure M3 is turned on and wet, you can produce a short circuit and therefore toast the telephone.

Remove detachable components

When the Condor Allure M3 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to take away the shell, the SIM card, the SD card and the battery if possible. When done, put all of these items to dry and continue to the next step.

Aspire the water that is in your Condor Allure M3

Utilizing a straw, you will need to suck up the water that is contained in your Condor Allure M3. For this, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Condor Allure M3, you will be ready to start drying it.

Dry the Condor Allure M3

The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. When it is performed, we suggest you to leave the Condor Allure M3 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Condor Allure M3.

Reassemble the components and turn on the Condor Allure M3

When you have completed the prior steps, your Condor Allure M3 should be dry. So now you can try to turn on the Condor Allure M3. In the event that this doesn’t work, we suggest you to wait a few days or to bring the Condor Allure M3 to a repairman.

What should not be done if perhaps the Condor Allure M3 has fallen into the water

You will find a number of things not to perform when ever your Condor Allure M3 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can destroy the Condor Allure M3. Next, it is strongly advised not to use a heat source to dry the Condor Allure M3. In fact, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could also ruin the Condor Allure M3.