Whether in the toilet or in a swimming pool, it from time to time happens that the Caterpillar CAT S30 is dropped in the water. Even so, it isn’t because a phone has fallen in the water that it is inevitably dead. In fact, it is possible to redo an Caterpillar CAT S30 that has fallen in the water. To do this, it is essential to respect specific steps. People often have bad reflexes and this is what can damage the Caterpillar CAT S30. We will first discover the steps to be taken after the Caterpillar CAT S30 has fallen into the water. We will discover in the secondary place the classical errors that a good number of people make.
Methods to follow if your Caterpillar CAT S30 fell into the water
If perhaps you desire to restore your Caterpillar CAT S30 in operating order, we recommend that you follow the steps listed below.
Do not try to turn the Caterpillar CAT S30 back on after exiting the water
One thing to do when the Caterpillar CAT S30 has fallen into the water is to turn off the phone. In fact, if it didn’t switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Caterpillar CAT S30 is started and wet, you may make a short circuit and therefore toast the phone.
Remove detachable components
When the Caterpillar CAT S30 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Caterpillar CAT S30
By using a straw, you must suck up the water that is contained in your Caterpillar CAT S30. For this, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Caterpillar CAT S30, you will have the ability to start drying it.
Dry the Caterpillar CAT S30
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the Caterpillar CAT S30 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Caterpillar CAT S30.
Reassemble the components and turn on the Caterpillar CAT S30
When you have completed the previous steps, your Caterpillar CAT S30 should be dry. So now you can make an attempt to turn on the Caterpillar CAT S30. In the event that this does not do the job, we suggest you to wait some days or to bring the Caterpillar CAT S30 to a repairman.
What should not be done if the Caterpillar CAT S30 has fallen into the water
You will find several things not to do when ever your Caterpillar CAT S30 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Caterpillar CAT S30. Next, it is highly suggested not to use a heat source to dry the Caterpillar CAT S30. Without a doubt, techniques such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could additionally ruin the Caterpillar CAT S30.