How to fix a water damaged on Caterpillar CAT B30

Whether in the toilet or in a pool, it from time to time occurs that the Caterpillar CAT B30 is slipped in the water. On the other hand, it is not because a mobile has fallen in the water that it is unavoidably dead. In truth, it is feasible to redo an Caterpillar CAT B30 that has fallen in the water. To achieve this, it is necessary to respect certain steps. People frequently have bad reflexes and this is what can damage the Caterpillar CAT B30. We will 1st discover the techniques to be taken after the Caterpillar CAT B30 has fallen into the water. We will discover in the 2nd place the common mistakes that a large number of people make.water-damaged-Caterpillar-CAT-B30

Steps to follow in cases where your Caterpillar CAT B30 fell into the water

If perhaps you wish to restore your Caterpillar CAT B30 in operating order, we highly recommend that you follow the steps below.

Don’t attempt to turn the Caterpillar CAT B30 back on after getting out the water

The first thing to do when the Caterpillar CAT B30 has fallen into the water is to turn off the mobile. In truth, in cases where it did not switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Caterpillar CAT B30 is started and wet, you can produce a short circuit and therefore toast the mobile.

Remove detachable components

Once the Caterpillar CAT B30 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be necessary to take out the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Caterpillar CAT B30

By using a straw, you must suck up the water that is contained in your Caterpillar CAT B30. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Caterpillar CAT B30, you will have the capacity to start drying it.

Dry the Caterpillar CAT B30

The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the mobile to heat up or damage the mobile. Once it is finished, we recommend you to leave the Caterpillar CAT B30 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Caterpillar CAT B30.

Reassemble the components and turn on the Caterpillar CAT B30

When you have completed the prior steps, your Caterpillar CAT B30 should be dry. So now you can make an attempt to turn on the Caterpillar CAT B30. If this doesn’t work, we recommend you to hang on a few days or to bring the Caterpillar CAT B30 to a repairshop.

What should not be done in cases where the Caterpillar CAT B30 has fallen into the water

There are several stuff not to do when your Caterpillar CAT B30 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can destroy the Caterpillar CAT B30. Next, it is highly recommended not to use a heat source to dry the Caterpillar CAT B30. Indeed, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could likewise damage the Caterpillar CAT B30.