Whether in the wc or in a pool, it sometimes occurs that the Bq is slipped into the water. Even so, it is not simply because a phone has fallen into the water that it’s undoubtedly dead. Indeed, it is possible to redo an Bq that has fallen into the water. To do this, it is needed to respect certain steps. People typically have bad reflexes and this is what can deteriorate the Bq. We will first discover the steps to be taken after the Bq has fallen into the water. We will discover in the 2nd place the classical mistakes that a good number of people make.
Steps to follow if your Bq fell into the water
If perhaps you desire to recover your Bq in working order, we highly recommend that you follow the steps listed below.
Don’t try to turn the Bq back on after exiting the water
The first thing to accomplish when the Bq has fallen into the water is to switch off the phone. Indeed, if it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Bq is switched on and wet, you may produce a short circuit and as a result toast the phone.
Remove detachable components
When the Bq is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to remove the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Bq
Using a straw, you will have to suck up the water that is contained in your Bq. For this, you simply need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Bq, you will have the ability to start drying it.
Dry the Bq
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is done, we suggest you to leave the Bq in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Bq.
Reassemble the components and turn on the Bq
When you have completed the previous steps, your Bq should be dry. So now you can try to turn on the Bq. If this doesn’t function, we suggest you to hold out a couple of days or to bring the Bq to a repairshop.
What should not be done if the Bq has fallen into the water
There are a number of points not to accomplish when ever your Bq has fallen into the water. The first is to try to turn the phone back on just after. This can kill the Bq. Next, it is strongly recommended not to use a heat source to dry the Bq. Without a doubt, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could likewise ruin the Bq.
