Whether in the wc or in a swimming pool, it from time to time happens that the BQ Aquaris M4.5 is slipped in the water. On the other hand, it isn’t because a phone has fallen in the water that it is inevitably dead. In truth, it is possible to redo an BQ Aquaris M4.5 that has fallen in the water. To achieve this, it is necessary to respect specific actions. People often have bad reflexes and this is what can deteriorate the BQ Aquaris M4.5. We will first of all discover the techniques to be taken after the BQ Aquaris M4.5 has fallen into the water. We will discover in the secondary place the common mistakes that a good number of people make.
Methods to follow in cases where your BQ Aquaris M4.5 fell into the water
If you want to restore your BQ Aquaris M4.5 in operating order, we highly recommend that you follow the steps below.
Don’t attempt to turn the BQ Aquaris M4.5 back on after getting out the water
The very first thing to perform when the BQ Aquaris M4.5 has fallen into the water is to switch off the phone. In truth, in cases where it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the BQ Aquaris M4.5 is started and wet, you can produce a short circuit and therefore toast the phone.
Remove detachable components
When the BQ Aquaris M4.5 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your BQ Aquaris M4.5
By using a straw, you have got to suck up the water that is contained in your BQ Aquaris M4.5. For this, you just need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your BQ Aquaris M4.5, you will be ready to start drying it.
Dry the BQ Aquaris M4.5
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using methods that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the BQ Aquaris M4.5 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the BQ Aquaris M4.5.
Reassemble the components and turn on the BQ Aquaris M4.5
When you have completed the prior steps, your BQ Aquaris M4.5 should be dry. So now you can make an attempt to turn on the BQ Aquaris M4.5. If perhaps this doesn’t function, we advise you to wait a couple of days or to bring the BQ Aquaris M4.5 to a repairshop.
What should not be done in cases where the BQ Aquaris M4.5 has fallen into the water
There are several stuff not to perform when ever your BQ Aquaris M4.5 has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can destroy the BQ Aquaris M4.5. Following, it is highly recommended not to use a heat source to dry the BQ Aquaris M4.5. Indeed, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could also ruin the BQ Aquaris M4.5.
