How to fix a water damaged on BQ Aquaris E5

Whether in the toilet or in a pool, it sometimes happens that the BQ Aquaris E5 is slipped in the water. Nonetheless, it isn’t simply because a mobile has fallen in the water that it’s inevitably dead. In truth, it is possible to redo an BQ Aquaris E5 that has fallen in the water. To do this, it is needed to respect certain actions. People typically have bad reflexes and this is what can deteriorate the BQ Aquaris E5. We will first of all discover the steps to be taken after the BQ Aquaris E5 has fallen into the water. We will discover in the second place the common errors that a good number of people make.water-damaged-BQ-Aquaris-E5

Methods to follow if your BQ Aquaris E5 fell into the water

If perhaps you need to restore your BQ Aquaris E5 in operating order, we advise that you follow the steps listed below.

Don’t try to turn the BQ Aquaris E5 back on after exiting the water

The first thing to perform when the BQ Aquaris E5 has fallen into the water is to turn off the mobile. In truth, if it did not switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the BQ Aquaris E5 is turned on and wet, you can make a short circuit and as a result toast the mobile.

Remove detachable components

Once the BQ Aquaris E5 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and proceed to the following step.

Aspire the water that is in your BQ Aquaris E5

By using a straw, you have got to suck up the water that is contained in your BQ Aquaris E5. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your BQ Aquaris E5, you will have the capacity to start drying it.

Dry the BQ Aquaris E5

The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. Once it is performed, we suggest you to leave the BQ Aquaris E5 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the BQ Aquaris E5.

Reassemble the components and turn on the BQ Aquaris E5

When you have completed the prior steps, your BQ Aquaris E5 should be dry. So now you can try to turn on the BQ Aquaris E5. If perhaps this does not function, we suggest you to wait some days or to bring the BQ Aquaris E5 to a repairman.

What should not be done if the BQ Aquaris E5 has fallen into the water

There are a number of stuff not to perform when ever your BQ Aquaris E5 has fallen into the water. The first of all is to try to turn the mobile back on just after. This can demolish the BQ Aquaris E5. Next, it is highly suggested not to use a heat source to dry the BQ Aquaris E5. Certainly, techniques such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. Certainly, it could likewise ruin the BQ Aquaris E5.