Whether in the wc or in a pool, it sometimes occurs that the BQ Aquaris 5 is slipped into the water. On the other hand, it isn’t because a cellphone has fallen into the water that it is obviously dead. In fact, it is possible to redo an BQ Aquaris 5 that has fallen into the water. To do this, it is needed to respect particular actions. People often have bad reflexes and this is what can degrade the BQ Aquaris 5. We will 1st see the steps to be taken after the BQ Aquaris 5 has fallen into the water. We will see in the secondary place the classical errors that most people make.
Steps to follow in cases where your BQ Aquaris 5 fell into the water
If perhaps you wish to recover your BQ Aquaris 5 in working order, we suggest that you follow the steps below.
Do not try to turn the BQ Aquaris 5 back on after getting out the water
The very first thing to perform when the BQ Aquaris 5 has fallen into the water is to switch off the cellphone. In fact, in cases where it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the BQ Aquaris 5 is started and wet, you can create a short circuit and consequently toast the cellphone.
Remove detachable components
When the BQ Aquaris 5 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be needed to remove the shell, the SIM card, the SD card and the battery if possible. When finished, put all of these things to dry and continue to the following step.
Aspire the water that is in your BQ Aquaris 5
Employing a straw, you must suck up the water that is contained in your BQ Aquaris 5. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your BQ Aquaris 5, you will be ready to start drying it.
Dry the BQ Aquaris 5
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. When it is done, we recommend you to leave the BQ Aquaris 5 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the BQ Aquaris 5.
Reassemble the components and turn on the BQ Aquaris 5
When you have completed the previous steps, your BQ Aquaris 5 should be dry. So now you can make an attempt to turn on the BQ Aquaris 5. If this doesn’t perform, we recommend you to wait a couple of days or to bring the BQ Aquaris 5 to a repairshop.
What should not be done in cases where the BQ Aquaris 5 has fallen into the water
There are several points not to perform when ever your BQ Aquaris 5 has fallen into the water. The 1st is to make an attempt to turn the cellphone back on just after. This can demolish the BQ Aquaris 5. Following, it is strongly advised not to use a heat source to dry the BQ Aquaris 5. Without a doubt, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could also damage the BQ Aquaris 5.
