Whether in the wc or in a pool, it from time to time happens that the BQ Aquaris 4.5 is slipped in the water. Nevertheless, it’s not because a telephone has fallen in the water that it’s unavoidably dead. Certainly, it is possible to redo an BQ Aquaris 4.5 that has fallen in the water. To get this done, it is required to respect certain actions. People often have bad reflexes and this is what can degrade the BQ Aquaris 4.5. We will first of all discover the methods to be taken after the BQ Aquaris 4.5 has fallen into the water. We will discover in the secondary place the classical errors that most people make.
Steps to follow if your BQ Aquaris 4.5 fell into the water
Whenever you desire to restore your BQ Aquaris 4.5 in operating order, we recommend that you follow the steps below.
Do not try to turn the BQ Aquaris 4.5 back on after getting out the water
The very first thing to do when the BQ Aquaris 4.5 has fallen into the water is to shut off the telephone. Certainly, if it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the BQ Aquaris 4.5 is started and wet, you could create a short circuit and consequently toast the telephone.
Remove detachable components
When the BQ Aquaris 4.5 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your BQ Aquaris 4.5
Utilizing a straw, you need to suck up the water that is contained in your BQ Aquaris 4.5. For doing it, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your BQ Aquaris 4.5, you will have the capacity to start drying it.
Dry the BQ Aquaris 4.5
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Prevent using techniques that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the BQ Aquaris 4.5 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the BQ Aquaris 4.5.
Reassemble the components and turn on the BQ Aquaris 4.5
When you have completed the previous steps, your BQ Aquaris 4.5 should be dry. So now you can try to turn on the BQ Aquaris 4.5. If perhaps this doesn’t work, we advise you to wait a couple of days or to bring the BQ Aquaris 4.5 to a repairman.
What should not be done if the BQ Aquaris 4.5 has fallen into the water
You will find several things not to do when your BQ Aquaris 4.5 has fallen into the water. The first of all is to try to turn the telephone back on just after. This can demolish the BQ Aquaris 4.5. Following, it is highly advised not to use a heat source to dry the BQ Aquaris 4.5. In fact, methods which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the telephone, do not shake it. Certainly, it could as well ruin the BQ Aquaris 4.5.
