Whether in the wc or in a swimming pool, it from time to time happens that the Bluboo Xtouch is dropped into the water. Nonetheless, it is not because a cellphone has fallen into the water that it is obviously dead. In truth, it is possible to redo an Bluboo Xtouch that has fallen into the water. To get this done, it is needed to respect certain steps. People often have bad reflexes and this is what can damage the Bluboo Xtouch. We will 1st discover the steps to be taken after the Bluboo Xtouch has fallen into the water. We will discover in the 2nd place the common errors that many people make.
Steps to follow if your Bluboo Xtouch fell into the water
In the event that you want to recover your Bluboo Xtouch in working order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Bluboo Xtouch back on after getting out the water
One thing to perform when the Bluboo Xtouch has fallen into the water is to shut off the cellphone. In truth, if it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Bluboo Xtouch is switched on and wet, you may produce a short circuit and consequently toast the cellphone.
Remove detachable components
When the Bluboo Xtouch is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be needed to remove the shell, the SIM card, the SD card and the electric battery if possible. When finished, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Bluboo Xtouch
Utilizing a straw, you need to suck up the water that is contained in your Bluboo Xtouch. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Bluboo Xtouch, you will have the ability to start drying it.
Dry the Bluboo Xtouch
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the cellphone to heat up or damage the cellphone. When it is finished, we advise you to leave the Bluboo Xtouch in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Bluboo Xtouch.
Reassemble the components and turn on the Bluboo Xtouch
When you have completed the prior steps, your Bluboo Xtouch should be dry. So now you can try to turn on the Bluboo Xtouch. If this doesn’t perform, we advise you to hang on a couple of days or to bring the Bluboo Xtouch to a repairshop.
What should not be done if the Bluboo Xtouch has fallen into the water
There are a number of things not to perform when ever your Bluboo Xtouch has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can demolish the Bluboo Xtouch. Next, it is highly advised not to use a heat source to dry the Bluboo Xtouch. Without a doubt, methods such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Indeed, it could likewise ruin the Bluboo Xtouch.
