How to fix a water damaged on Bluboo Xfire

Whether in the wc or in a pool, it sometimes occurs that the Bluboo Xfire is dropped in the water. Nevertheless, it isn’t because a mobile has fallen in the water that it is undoubtedly dead. In fact, it is feasible to redo an Bluboo Xfire that has fallen in the water. To accomplish this, it is important to respect certain steps. People generally have bad reflexes and this is what can damage the Bluboo Xfire. We will 1st see the methods to be taken after the Bluboo Xfire has fallen into the water. We will see in the 2nd place the classical errors that many people make.water-damaged-Bluboo-Xfire

Methods to follow if your Bluboo Xfire fell into the water

If perhaps you desire to restore your Bluboo Xfire in operating order, we advise that you follow the steps below.

Don’t try to turn the Bluboo Xfire back on after getting out the water

One thing to perform when the Bluboo Xfire has fallen into the water is to switch off the mobile. In fact, if it did not turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Bluboo Xfire is started and wet, you might produce a short circuit and as a result toast the mobile.

Remove detachable components

When the Bluboo Xfire is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be important to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the following step.

Aspire the water that is in your Bluboo Xfire

Utilizing a straw, you need to suck up the water that is contained in your Bluboo Xfire. For this, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Bluboo Xfire, you will have the capacity to start drying it.

Dry the Bluboo Xfire

The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile to heat up or damage the mobile. When it is completed, we recommend you to leave the Bluboo Xfire in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Bluboo Xfire.

Reassemble the components and turn on the Bluboo Xfire

When you have completed the previous steps, your Bluboo Xfire should be dry. So now you can make an attempt to turn on the Bluboo Xfire. If this doesn’t function, we recommend you to wait some days or to bring the Bluboo Xfire to a repairman.

What should not be done if the Bluboo Xfire has fallen into the water

You will find several stuff not to perform when ever your Bluboo Xfire has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can kill the Bluboo Xfire. Next, it is strongly advised not to use a heat source to dry the Bluboo Xfire. In fact, solutions such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the mobile, do not shake it. Indeed, it could additionally ruin the Bluboo Xfire.