Whether in the wc or in a pool, it occasionally occurs that the Bluboo X550 is slipped in the water. On the other hand, it is not because a mobile has fallen in the water that it’s obviously dead. Indeed, it is possible to redo an Bluboo X550 that has fallen in the water. To achieve this, it is necessary to respect certain steps. People generally have bad reflexes and this is what can damage the Bluboo X550. We will first see the methods to be taken after the Bluboo X550 has fallen into the water. We will see in the second place the classical mistakes that the majority of people make.
Methods to follow if perhaps your Bluboo X550 fell into the water
If you desire to restore your Bluboo X550 in working order, we recommend that you follow the steps listed below.
Don’t try to turn the Bluboo X550 back on after exiting the water
The very first thing to accomplish when the Bluboo X550 has fallen into the water is to shut off the mobile. Indeed, if perhaps it didn’t turn off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Bluboo X550 is switched on and wet, you could generate a short circuit and therefore toast the mobile.
Remove detachable components
Once the Bluboo X550 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Bluboo X550
Employing a straw, you will need to suck up the water that is contained in your Bluboo X550. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Bluboo X550, you will have the capacity to start drying it.
Dry the Bluboo X550
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using methods that cause the mobile to heat up or damage the mobile. Once it is done, we suggest you to leave the Bluboo X550 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Bluboo X550.
Reassemble the components and turn on the Bluboo X550
When you have completed the previous steps, your Bluboo X550 should be dry. So now you can try to turn on the Bluboo X550. If this does not do the job, we suggest you to hold out a couple of days or to bring the Bluboo X550 to a repairshop.
What should not be done if perhaps the Bluboo X550 has fallen into the water
There are a number of points not to accomplish when ever your Bluboo X550 has fallen into the water. The first is to try to turn the mobile back on just after. This can demolish the Bluboo X550. Next, it is highly recommended not to use a heat source to dry the Bluboo X550. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the Bluboo X550.
