Whether in the toilet or in a pool, it from time to time happens that the Blackviews Ultra is dropped into the water. Nonetheless, it’s not simply because a phone has fallen into the water that it’s inevitably dead. Certainly, it is possible to redo an Blackviews Ultra that has fallen into the water. To get this done, it is required to respect particular steps. People frequently have bad reflexes and this is what can degrade the Blackviews Ultra. We will 1st discover the steps to be taken after the Blackviews Ultra has fallen into the water. We will discover in the secondary place the common errors that most people make.
Methods to follow if perhaps your Blackviews Ultra fell into the water
If perhaps you want to restore your Blackviews Ultra in operating order, we suggest that you follow the steps listed below.
Do not attempt to turn the Blackviews Ultra back on after exiting the water
One thing to accomplish when the Blackviews Ultra has fallen into the water is to turn off the phone. Certainly, if perhaps it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Blackviews Ultra is turned on and wet, you might make a short circuit and as a result toast the phone.
Remove detachable components
When the Blackviews Ultra is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it’ll be required to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Blackviews Ultra
By using a straw, you must suck up the water that is contained in your Blackviews Ultra. For this, you merely have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackviews Ultra, you will be able to start drying it.
Dry the Blackviews Ultra
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the phone to heat up or damage the phone. When it is completed, we recommend you to leave the Blackviews Ultra in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Blackviews Ultra.
Reassemble the components and turn on the Blackviews Ultra
When you have completed the previous steps, your Blackviews Ultra should be dry. So now you can make an attempt to turn on the Blackviews Ultra. If perhaps this doesn’t function, we recommend you to hold out a few days or to bring the Blackviews Ultra to a repairman.
What should not be done if perhaps the Blackviews Ultra has fallen into the water
You will find a number of points not to accomplish when ever your Blackviews Ultra has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can demolish the Blackviews Ultra. Following, it is strongly suggested not to use a heat source to dry the Blackviews Ultra. In fact, methods such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Blackviews Ultra.
