How to fix a water damaged on Blackviews R6

Whether in the wc or in a swimming pool, it occasionally happens that the Blackviews R6 is slipped into the water. On the other hand, it isn’t simply because a cellphone has fallen into the water that it is inevitably dead. Indeed, it is possible to redo an Blackviews R6 that has fallen into the water. To accomplish this, it is necessary to respect certain actions. People typically have bad reflexes and this is what can deteriorate the Blackviews R6. We will first discover the methods to be taken after the Blackviews R6 has fallen into the water. We will discover in the secondary place the classical errors that most people make.water-damaged-Blackviews-R6

Steps to follow in cases where your Blackviews R6 fell into the water

If you desire to restore your Blackviews R6 in operating order, we recommend that you follow the steps below.

Do not attempt to turn the Blackviews R6 back on after exiting the water

The very first thing to perform when the Blackviews R6 has fallen into the water is to switch off the cellphone. Indeed, in cases where it didn’t switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Blackviews R6 is switched on and wet, you may produce a short circuit and consequently toast the cellphone.

Remove detachable components

When the Blackviews R6 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the following step.

Aspire the water that is in your Blackviews R6

By using a straw, you need to suck up the water that is contained in your Blackviews R6. For this, you just have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackviews R6, you will be ready to start drying it.

Dry the Blackviews R6

The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the cellphone to heat up or damage the cellphone. When it is finished, we recommend you to leave the Blackviews R6 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Blackviews R6.

Reassemble the components and turn on the Blackviews R6

When you have completed the prior steps, your Blackviews R6 should be dry. So now you can make an attempt to turn on the Blackviews R6. In the event that this does not perform, we recommend you to hang on a couple of days or to bring the Blackviews R6 to a repairshop.

What should not be done in cases where the Blackviews R6 has fallen into the water

There are several things not to perform when ever your Blackviews R6 has fallen into the water. The first is to make an attempt to turn the cellphone back on just after. This can destroy the Blackviews R6. Following, it is strongly suggested not to use a heat source to dry the Blackviews R6. Certainly, solutions such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could likewise damage the Blackviews R6.