How to fix a water damaged on Blackviews Omega Pro

Whether in the toilet or in a swimming pool, it from time to time happens that the Blackviews Omega Pro is dropped into the water. Nevertheless, it is not because a phone has fallen into the water that it is inevitably dead. In truth, it is possible to redo an Blackviews Omega Pro that has fallen into the water. To accomplish this, it is required to respect particular actions. People often have bad reflexes and this is what can deteriorate the Blackviews Omega Pro. We will 1st see the techniques to be taken after the Blackviews Omega Pro has fallen into the water. We will see in the 2nd place the classical errors that most people make.water-damaged-Blackviews-Omega-Pro

Steps to follow if perhaps your Blackviews Omega Pro fell into the water

In the event that you desire to recover your Blackviews Omega Pro in operating order, we advise that you follow the steps listed below.

Don’t try to turn the Blackviews Omega Pro back on after exiting the water

The first thing to accomplish when the Blackviews Omega Pro has fallen into the water is to switch off the phone. In truth, if perhaps it didn’t turn off, turn it off without doing any other manipulation. If it is already off, do not try to turn it back on for the moment. If the Blackviews Omega Pro is switched on and wet, you can produce a short circuit and consequently toast the phone.

Remove detachable components

When the Blackviews Omega Pro is out of the water and switched off, it will have to be disassembled to the maximum. This means that it’ll be required to take away the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the next step.

Aspire the water that is in your Blackviews Omega Pro

Employing a straw, you need to suck up the water that is contained in your Blackviews Omega Pro. For this, you just have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Blackviews Omega Pro, you will be ready to start drying it.

Dry the Blackviews Omega Pro

The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using methods that cause the phone to heat up or damage the phone. When it is done, we recommend you to leave the Blackviews Omega Pro in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Blackviews Omega Pro.

Reassemble the components and turn on the Blackviews Omega Pro

When you have completed the previous steps, your Blackviews Omega Pro should be dry. So now you can try to turn on the Blackviews Omega Pro. If perhaps this does not perform, we recommend you to wait a few days or to bring the Blackviews Omega Pro to a repairman.

What should not be done if perhaps the Blackviews Omega Pro has fallen into the water

There are a number of stuff not to accomplish when your Blackviews Omega Pro has fallen into the water. The 1st is to try to turn the phone back on just after. This can demolish the Blackviews Omega Pro. Following, it is strongly advised not to use a heat source to dry the Blackviews Omega Pro. Certainly, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could also damage the Blackviews Omega Pro.