Whether in the wc or in a pool, it from time to time happens that the Blackviews Breeze is slipped in the water. Nonetheless, it isn’t because a cellphone has fallen in the water that it’s unavoidably dead. Certainly, it is feasible to redo an Blackviews Breeze that has fallen in the water. To accomplish this, it is essential to respect particular actions. People generally have bad reflexes and this is what can degrade the Blackviews Breeze. We will 1st discover the techniques to be taken after the Blackviews Breeze has fallen into the water. We will discover in the secondary place the common mistakes that many people make.
Steps to follow if perhaps your Blackviews Breeze fell into the water
In the event that you desire to restore your Blackviews Breeze in working order, we advise that you follow the steps listed below.
Do not attempt to turn the Blackviews Breeze back on after exiting the water
The very first thing to do when the Blackviews Breeze has fallen into the water is to switch off the cellphone. Certainly, if perhaps it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Blackviews Breeze is turned on and wet, you could create a short circuit and therefore toast the cellphone.
Remove detachable components
Once the Blackviews Breeze is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be essential to take away the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Blackviews Breeze
Employing a straw, you will have to suck up the water that is contained in your Blackviews Breeze. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Blackviews Breeze, you will have the capacity to start drying it.
Dry the Blackviews Breeze
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the cellphone to heat up or damage the cellphone. Once it is done, we recommend you to leave the Blackviews Breeze in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Blackviews Breeze.
Reassemble the components and turn on the Blackviews Breeze
When you have completed the previous steps, your Blackviews Breeze should be dry. So now you can try to turn on the Blackviews Breeze. If perhaps this does not function, we recommend you to hang on a couple of days or to bring the Blackviews Breeze to a repairman.
What should not be done if perhaps the Blackviews Breeze has fallen into the water
There are a number of things not to do when ever your Blackviews Breeze has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can destroy the Blackviews Breeze. Following, it is strongly advised not to use a heat source to dry the Blackviews Breeze. Without a doubt, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could as well ruin the Blackviews Breeze.
